申请成为商家
扫码下载塑造APP
Covestro·生产厂商
{{supplier.mfrs_full_name}}
{{supplier.sales_name}}
{{supplier.sales_email}}
{{compareList.length}}
Texin®
TPU
RxT50D
| Product information | |
|---|---|
| Manufacturer | Covestro AG |
| Part Marking Code | |
| Material Shape | |
| Process | |
| Material Attribute | |
| specification | |
| Features | |
| Application |
| Physical property | Standard | Value | Unit |
|---|---|---|---|
| Density | ASTM D792 | g/cm³ | |
| Density | ISO 1183 | g/cm³ | |
| Shrinkage Flow 2.5mm | ASTM D955 | % | |
| Shrinkage xFlow 2.5mm | ASTM D955 | % | |
| Shrinkage xFlow 2.5mm | ISO 2577 | % | |
| Shrinkage Flow 2.5mm | ISO 2577 | % | |
| Melt Index 200°C 8.7kg | ASTM D1238 | g/10min | |
| Melt Index 200°C 8.7kg | ISO 1133 | g/10min |
| Hardness | Standard | Value | Unit |
|---|---|---|---|
| Shore Hardness D | ASTM D2240 | ||
| Shore Hardness D | ISO 868 |
| Mechanical behavior | Standard | Value | Unit |
|---|---|---|---|
| Tensile Strength 100% Strain | ISO 37 | MPa | |
| Tensile Strength 300% Strain | ASTM D412 | MPa | |
| Tensile Strength Yield | ASTM D412 | MPa | |
| Tensile Strength Yield | ISO 37 | MPa | |
| Elongation Break | ASTM D412 | % | |
| Elongation Break | ISO 37 | % | |
| Tearing Strength Die C | ASTM D624 | KN/m | |
| Tearing Strength | ISO 34 | KN/m | |
| Flexural Modulus 23°C | ASTM D790 | MPa | |
| Flexural Modulus 23°C | ISO 178 | MPa | |
| Tabor Wear H-18 Wheel 1kg 1000 Cycles | ASTM D1044 | mg | |
| Tabor Wear H-18 Wheel 1kg 1000 Cycles | ISO 4649 | mg | |
| Compressive Set 23°C 22hr Post-cured 16 hr at 110°C | ISO 815 | % | |
| Compressive Set 70°C 22hr Post-cured 16 hr at 110°C | ASTM D395 | % |
| Optical performance | Standard | Value | Unit |
|---|---|---|---|
| Yellow Index | ASTM E313 | YI | |
| Yellow Index | DIN 6167 | YI |
| Thermal | Standard | Value | Unit |
|---|---|---|---|
| Vicat Softening Temperature 50°C/hr | ISO 306 | °C | |
| Vicat Softening Temperature 50°C/hr | ASTM D1525 | °C |
| Injection molding | Value | Unit |
|---|---|---|
| Dry Temperature | °C | |
| Dry Time | hr | |
| Water Content Control | % | |
| Zone1 Temperature | °C | |
| Zone2 Temperature | °C | |
| Zone3 Temperature | °C | |
| Nozzle Temperature | °C | |
| Melt Temperature | °C | |
| Mould Temperature | °C | |
| Injection Pressure | MPa | |
| Injection Speed | ||
| Screw Speed | rpm | |
| Back Pressure | MPa | |
| Cushion | mm |
Disclaimer: [17Suzao] the data displayed on the data search platform of industrial materials is for the convenience of users, this data search platform shall not be responsible for the uncertainties and consequences caused by relevant information, such as brand, data, reference value and all other data and Suggestions.Therefore, if there is any doubt about the data, the users should confirm the reliability of the data with the manufacturer or purchaser before using the product.
点击查看电话
{{item.title}}
{{item.title}}
您的体验查看次数已用完
扫码关注，获取免费浏览物性表权益
打开微信扫码关注公众号
请把您发现的问题反馈给我们，我们将尽快解决！
将文件拖到此处，或点击上传
只能上传jpg/png文件，且不超过500kb
您的邮箱还未验证，点击发送验证邮件至您的邮箱
邮箱：{{userEmail}}
科思创 Texin® TPU RxT50D物性表
您还未留邮箱，填写邮箱后使用该功能,